 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 05248 EM8DLP-100L EMI FILTER/TVS ARRAY APPLICATIONS Cellular Phones Color LCD Display Panel Notebooks Personal Digital Assistant (PDA) Ground Positioning System (GPS) SMART Cards IEC COMPATIBILITY (EN61000-4) 61000-4-2 (ESD): Air - 15kV, Contact - 8kV 61000-4-4 (EFT): 40A - 5/50ns DFN-16LP FEATURES ESD Protection > 25 kilovolts EMI Filtering/TVS Low Pass Filters Blocking Rectifier > 25db Attenuation from 800MHz to 3GHz Protects up to Eight(8) Data Lines RoHS Compliant MECHANICAL CHARACTERISTICS DFN-16LP Package Available in Lead-Free Pure-Tin Plating(Annealed) Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270C Consult Factory for Leaded Device Availability Flammability Rating UL 94V-0 Device Marking: Marking Code 12mm Tape and Reel Per EIA Standard 481 PIN CONFIGURATION For Each Line I/On 100 Ohm I/On 1 2 3 4 5 6 7 8 10pF GND 10pF GND 16 15 14 13 12 11 10 BOTTOM VIEW 9 Note: I/O connected from pins 1-16, 2-15, 3-14, 5-12, 6-11, 7-10 and 8-9. 05248.R1 2/07 1 www.protekdevices.com EM8DLP-100L DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25C Unless Otherwise Specified PARAMETER Operating Temperature Storage Temperature DC Power Per Resistor Typical Resistance @ 20% Soldering Temperature for 10 seconds SYMBOL TA TSTG P R TL VALUE -40 to 85 -55 to 150 100 100 265 UNITS C C mW OHMS C ELECTRICAL CHARACTERISTICS PER LINE PART NUMBER DEVICE MARKING CODE RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE MAXIMUM REVERSE LEAKAGE CURRENT @3V ID A 0.1 @ 25C Unless Otherwise Specified MINIMUM ATTENUATION CUT-OFF FREQUENCY (50 OHMS I/O) ZERO BIAS TYPICAL CAPACITANCE (See Note 1) TYPICAL FORWARD VOLTAGE VWM VOLTS EM8DLP-100L 8LP 5.0 @ 1mA V(BR) VOLTS 6.0 @10mA VF VOLTS 0.8 @ 800-3000 MHz dB 25 fC MHz 150 @2.5V, 1MHz C pF 20 Note 1: 20% tolerance. FIGURE 1 INSERTION LOSS 0 -5 -10 Gain (dB) -15 -20 -25 -30 -35 0.1 1 10 100 2.5 Volts 0 Volts 1000 10000 Frequency (MHz) 05248.R1 2/07 2 www.protekdevices.com EM8DLP-100L GRAPHS 1.100 FIGURE 1 RESISTANCE VS TEMPERATURE (Normalized to Resistance at 25C) Normalized Resistance 1.060 1.020 0.980 0.940 0.900 -40 -20 0 20 40 Temperature C 60 80 100 1.6 Cj - Capacitance (Normalized) FIGURE 3 CAPACITANCE VS REVERSE VOLTAGE (Normalized to Capacitance at 2.5V DC & 25C) 1.4 1.2 1 0.8 0.6 0.4 0.2 0 0 1 2 3 4 5 6 VR - Reverse Voltage - Volts FIGURE 4 OVERSHOOT & CLAMPING VOLTAGE (through the filter) 35 5 Volts per Division 25 15 5 -5 ESD Test Pulse: +15 kilovolt, 1/30ns (waveform) 05248.R1 2/07 3 www.protekdevices.com EM8DLP-100L DFN-12LP PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE P1 PACKAGE DIMENSIONS MILLIMETERS DIM P1 P2 P3 L1 L2 L3 p G1 G2 G3 G4 P3 INCHES MIN 0.154 0.059 0.020 0.008 0.009 0.005 0.020 0.114 0.016 0.006 0.010 MAX 0.161 0.067 0.024 0.011 0.012 0.007 0.020 0.122 0.020 0.010 0.014 MIN 3.90 1.50 0.50 0.21 0.23 0.13 0.50 2.90 0.40 0.15 0.25 MAX 4.10 1.70 0.60 0.28 0.30 0.18 0.50 3.10 0.50 0.25 0.35 P2 Pin 1 Reference TOP VIEW L3 p L2 1 SIDE VIEW L1 8 G2 16 G3 G1 BOTTOM VIEW 9 G4 NOTES: 1. Controlling dimensions in millimeters 2. Dimensino L1 applies to terminal and is measured between 0.25 and 0.30mm from terminal. 3. Coplanarity applies to the exposed pad as well as the terminals. 4. Dimension p is BSC. TAPE & REEL ORDERING NOMENCLATURE 1. Surface mount product is taped and reeled in accordance with EIA 481. 2. Suffix-T71 = 7 Inch Reel - 1,000 pieces per 12mm tape, i.e., EM8DLP-100L-T71. 3. Suffix-T73 = 7 Inch Reel - 3,000 pieces per 12mm tape, i.e., EM8DLP-100L-T73. 4. Suffix - LF = Lead-Free, Pure-Tin Plating, i.e., EM8DLP-100L-LF-T73. Outline & Dimensions: Rev 0 - 4/06, 06065 Tape & Reel Specifications (Dimensions in millimeters) Reel Dia. 178mm (7")/330mm(13") Tape Width 12mm A0 1.9 0.10 B0 K0 D E F 5.50 P0 t D P2 W P0 P2 P t 4.30 0.10 0.80 0.10 1.50 0.10 1.75 0.10 12.00 0.30 4.00 0.10 2.00 0.05 4.00 0.10 0.300.05 10 Pitches Cumulative Tolerance on Tape. 0.2 E Top cover tape A0 K0 B0 Pin 1 Indicated by Dot F W P User Direction of Feed COPYRIGHT (c) ProTek Devices 2007 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer's and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: sales@protekdevices.com Web Site: www.protekdevices.com 05248.R1 2/07 4 www.protekdevices.com |
Price & Availability of EM8DLP-100L
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |